CNC custom part can often be seen in the daily custom CNC work. Then how does custom CNC work? Today we will talk about the operation steps, as follows:
1. Turn on the machine: Turn on the machine power main switch to confirm that the machine is transmitting normally. Press the power button on the control panel to power the CNC system.
2. Each axis reference point: Select the return reference point mode, the X axis, Z axis, respectively, return to the reference point.
3. Program editor: technician input processing procedures to ensure that the input is correct.
4. Debug program: lock the machine, run the program, using the correctness of the graphics program.
5. Set the props parameters and workpiece coordinate system, fixture test cut workpiece blanks and knives: manually select the various tools, with a cut test tool to measure the tool compensation value, and implant the program specified tool compensation unit, Decimal point and sign.
6. Try to cut the workpiece: call out the current workpiece program, select the automatic mode of operation, select the appropriate feed override and fast magnification, press the start cycle button to start automatic cycle processing. The first piece of processing should be selected low fast rate, and the use of the system "single" function, can reduce the program and the knife caused by the failure of the error.
7. Bulk processing: The first piece of processing after the completion of the measurement of the size of the processing site. the first sample will be confirmed after the self-processing, and the operator is a technician rather than general workers, have independent operation of the second element , Height instrument and other precision measuring instruments. Modify the tool compensation value of each knife, and then process the second piece. After confirming the size of the correct recovery speed (100%), batch processing.
8. End the work, clean the machine, manually operate the machine, so that the knife in the appropriate position, first press the operation panel on the emergency stop button, and then turn off the operation panel power, machine power and external power supply.